Double Waterpump Tool for BMW
Please note: This tool will function the same as 115050 or 115030
Tool for removing waterpump on models with temperature dependent viscosity drive fan.
Applicable: M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M/N/S62. M70, M73, S14, S38, S50B30, S50B32, S54.
IMPORTANT: The nut on the fan has left handed threads. If you try to use the fan-pulley holder backwards (incorrectly) it could probably break. If you use it correctly, it will not break. This special tool covers most popular applications for securing Water Pump Hub from rotating during R & R of Fan Clutch Nut. This tool is normally used in conjunction with a 32mm thin open-end wrench or sometimes a 36mm thin open-end wrench.
Please note: This tool is made for OEM parts, ie: waterpump, waterpump pulley and the fasteners. If any of these parts have been replaced on the vehicle you are working on, there may be some variances or differing in tolerances. A slight modification to the DOUBLE HOLDER TOOL may be needed. If you are not prepared to modify this item please do not purchase this product. We have great success with these special holder tools for BMW (we are the first to bring these items to the world wide web) and it is very rare when a modification is needed, but you might find that you may need to do this.