audi 3391 audi 3243 -- mmk4mkt

Audi A8 L merges muscle and amenities
You know you're in a luxury car when the heated, massaging, leather-upholstered driver's seat feels so soothing that you don't want to exit the passenger compartment even after you have reached your ...
read more:

Piloti Joins Champion Racing; Audi Sport North America Official Footwear Supplier
Piloti Inc., premier racing and performance driving shoe manufacturer, announces its designation as the official footwear supplier to Champion Racing/Audi Sport North America. (PRWEB Jul 10, 2006)
read more:

Brake Caliper Rewind Set 47.99
U.S./EURO/ASIAN/4WD VEHICLES
Disc Brake Pad & Caliper Service Tool Kit
Includes 8 adapters Magnetic socket adapter.
For brake assemblies
For rotating pistons back into caliper to provide clearance for new pads
Prevents damage to the piston and bootDesigned for use with Mercedes, BMW, Volkswagen, GM, Audi, Ford,Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover and 4 wheel drive vehicles.Blow molded carryingcase for easy storage.
read more:

92mm Oil Wrench Socket 38.00

92mm Oil Filter Wrench
Will fit all Mann Knecht filters that require (92mm) and 15 inside flats.
Original Factory Tool Made in Germany. Size 92mm.
With outer (top) square drive size 12.5mm = 1/2 inch for ratchet or socket, or use the outside hex 27mm with a wrench.
15 point (inside flats or flutes).
Excellent high quality tool.
This tool will fit many (92mm) Volkswagen Audi Diesels.

Brake Caliper Rewind Set 49.50

U.S./EURO/ASIAN/4WD VEHICLES
Disc Brake Pad & Caliper Service Tool Kit
Includes 8 adapters Magnetic socket adapter.
For brake assemblies
For rotating pistons back into caliper to provide clearance for new pads
Prevents damage to the piston and bootDesigned for use with Mercedes, BMW, Volkswagen, GM, Audi, Ford,Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover and 4 wheel drive vehicles.Blow molded carryingcase for easy storage.

Live Data Hand Held Scanner 2995.00

Tired of HIGH prices on Scanners?
Serious Inquiries email sales@zdmak.com or call Toll Free 877 938 6657
This is the X431 "All in One" Hand held Diagnostic Scanner
Designed for the professional workshop.
Vehicle year coverage 1988 to 2003 Japanese, and European Vehicles.
Features: Reading and Clearing Fault Codes, Live Data, Component Activation & Data Graphing
Built in Printer, Software update via PC and Internet. All software on 1 Compact Flash card.
Mercedes, BMW, Vauxhall, VW/Audi, Toyota/Lexus,Nissan, Honda, Mitsubishi, Mazda, Chrysler, Fiat, Kia, Hyundai, Daewoo, Ford, Volvo, Renault, CitroenNew Volvo, Renault, Daewoo, Fiat,Kia and Hyundai software available now.
More info Here

Long Pattern Hex Set 4 13.50

4 Pc Long Allen Hex Set
Sizes include: 6, 7, 8, and 10mm Hex.
This set works well on several vehicles such as Audi, AMC, BMW,
Honda, Jaguar, Jeep, Saab, Volkswagen and Volvo.
3/8 Drive set of 4

Set 2 Tie Rod Tools 89.00

Set of 2 Pullers including:
Large Tie Rod Tool VW 1014 Separator used for disassembly of pitman arm type tie rod ends without tearing the ball joint boots. Opening size is 25mm. Most VW Audi & Late Porsche models.

PLUS *

Puller P266HX Separator used for disassembly of Pitman arm type tie rod ends without tearing the boots. Opening size is 18mm. Most VW Audi Late Porsche models.

Special Open Socket 22mm 25.00

On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action: 

Tie Rod Tool 44.50

Puller P266HXSeparator used for disassembly of Pitman arm type tie rod endswithout tearing the boots.Opening size is 18mm. Most VW Audi Late Porsche models.Clickhere for a Diagram on this tool.

17 x 17 Injection Wrench 59.50

Double Ended Flare Nut Box Wrench Size 17 x 17mmOverall Length 241mm (9.5 inch)For injection pipes on Volkswagen / Audi This tool will help you when you remove and install the fuel lines from the injection pump and the injectors themselves.For TDI: You will still need to torque the 17mm fittings down to spec, but this tool will make taking the fittings off a snap, as well as putting them back on.This is a Factory Tool Made in Germany

19mm Suspension Strut Socket 59.95

Special 19mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 19mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both.

2 Pins and 2 Plates 103.00

2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

21mm Suspension Strut Socket 59.95

Special 21mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 21mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both.

22mm Strut O/2 Sensor Socket 18.99

On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action:

3 Piece Oil Service Set 29.50

3 Piece Oil Service Set includes sizes 36mm, 32mm and 27mm 6 point sockets. (36 mm for M52, M60, M62, M70, M73 engines) Special 36mm Oil Filter Wrench Removes and installs filters on BMW Mini Cooper. The low profile socket fits 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8 in. drive Not for use with an impact wrench. BMW Mini Cooper, BMW M52 6 cylinder, BMW M60 8 cylinder, BMW M70 12 cylinder.Mercedes Benz diesel engines: OM604, OM605, OM606 (1995 W124 E300 diesel, 96 97 W210 E300 diesel, 1998 E300 turbodiesel).Same as Mercedes tool number: 606 589 01 09 00VW Volkswagen VR6 Also for Ford Truck 6.0L 03 04
Plus you get the 32mm and the 27mm.
27 mm for R&R of oil filter cartridge element.App.: M163 (Class A), C230 (Compressor)
32 mm for R&R of Oil filter cartridge element.Applicable: Opel Astra, Corsa, VW Passat, Audi.

32mm Oil Filter Wrench 35.99

2169 32 Oil Filter Wrench, steel grey,square drive nominal size 10mm = 3/8, resp.
outside hexagon 27 mm14 point s 74.4 mm 6 point s 32 mmOPEL Astra, Corsa, VW Passat, AUDI

Buy seperately or buy in a set of 3 sizes 27, 32 and 36mm.

Alternator Socket 27.00

For mounting the V belt pulley (slip clutch pulley) at the alternator (manuals call it a generator),
especially for T.D.I. VW Golf III, Vento, Passat and AUDI A 3
17MM outside dia. Length 30mm.
Also for Boxster. (See repair Group 27 (Porsche Bulletins) Boxster Alternators with free wheeling Pulleys. High Quality Tool
Made in Germany.
This 3400 is Hazet number 2592.

Audi Info and Timing 0.00

There are three main Cam bars for timing.
3391, 3243 and T40005
(T40005 is for V 8)
Notice the tool number 3242 this is the T.D.C (TOP DEAD CENTER) Pin
This pin goes with 3391 or 3243.
Type your selection in the search or you can find the tools in this Audi section.
Feel free to call me or email. I will try to assist you.
Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

B90 for Volkswagen Audi 377.00

Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies.Applicable: All Front wheel drive VW (Water cooled) and Audifrom early 1970 to present with S.R.W.B. and I.F.S. including A.W.D.Pictures are for reference only. This is the Volkswagen Audi Kit. The Volkswagen kit "only" available below.

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

BigMak Timing Kit 196.00

Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator

Bonus Torx Set 26.00

Torx Bonus Set Including Screwdriver Set 7 Pc. Sizes included: T8, T10, T15, T20, T25, T27 & T30.
Torx (6 Point) heads used for a wide variety of applications and a wide variety of vehicles. Please note: The screwdrivers are not tamperproof they are standard torx. The folding unit and ratchet at the bottom of the picture are both tamperproof. The Fold up tool has Tamperproof Torx tips. Each torx blade has a hole in the tip = Tamperproof) The sizes are: T9, T10, T15, T20, T25, T27, T30, T40 Some applications include: The T25 for use on E34 E32 E36 E39 E38 (tilt slide sunroof). The T30 is for most BMW with supplemental restraint systems / SRS (BMW REF 002110). The T20 is for some applications on E38 (Diffusion Disc Mount).
Torx Combo Mini Bit and Ratchet SetThe seven bits on the left side of the bit holer are Torx TamperproofPlus this set has 1 and 2 Phillips bits, and a flat head bit.The Tamperproof Torx sizes are: T10, T15, T20, T25, T30, T40for Volkswagen, Audi,Volvo, Mercedes and BMW applications.
You will get all of the tools shown here with this purchase.

Cam Bar and Pin for 2 Valve 139.50

Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

Cam Bar for 2 Valve 129.50

Camshaft Securing Bar Timing Tool
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4 94 97 AFC Engine
Please note: 3243 Securing Bar for2 valves per cylinder.

Cam Bar for 5 Valve 129.50

Camshaft Timing Tool Securing Bar
TOOL REF 3391
Cam Securing Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 (2002 4 cam)
Please note: 3391 for 5 valves per cylinder.

Cam Shaft Locking Plate 16.99

Cam Shaft Locking Plate 2065AUsed for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.All VW Audi Diesel and Volvo D24 6 Cylinder 2.4L diesel 1981 86 engines.

Cam Tool Puller 289.50

Volkswagen ref: T40001
First number 2510 1
Extractor (Puller)for the camshaft phasing gear with 5 and 6 spokes on 4 resp.
6 cylinder engines TDi, engines V6 and V8,
AUDI A 4, A 6, A 8
Second Item 2510 8 Extraction Hook
for the careful extraction of camshaft phasing gear with 5 spokes on VW/AUDI V8 carburetor engines.
Call if you have questions about this item.

Camshaft Locating Fixtures 150.00

Timing tools sold as a set (2) pieces.
Camshaft positioners, number 3341 especially for Audi A8.

Chain Adjuster 24.50

3366CHAIN ADJUSTER Required to change the troublesome cam adjuster seal
Audi and Volkswagen 4, 6 (2.7 and 2.8) and 8 CylWith 5 Valve per Cyl.
Also Audi VW 1.8 Golf Jetta Passat New Beetle
Note:The manual says to remove both camshafts to change the seal ...
but using this tool you can relieve the tension on the camshaft chainand lift it up far enough to clean, remove and replace the gasket and seal.
This procedure not only saves time but saves any other damagethat may happen to camshafts and bearings by removing them.
ORIGINAL MATRA FACTORY TOOL MADE IN GERMANY

CIS Injector Puller 9.99

Number 1123/4CIS Injector Puller tool used to easily remove CIS fuel injectors on many in line engines.In operation, this tool fits around the injector base and with a screwdriver(used as a lever put into the slots of the tool)simply "POP" the injector out, without damage to the injector hose.Applications include: All Gas Water Cooled Volkswagen,Porsche 924 and Audi 4000, 5000 with mechanical fuel injectors.
High quality Cis and Cis E fuel injector puller tool This is by far one of the more useful tools in the shop. If you have ever attempted the "two screwdriver technique" you will know it can be tricky. Injectors are proned to rusting when they have been in the head for a long period of time, they become lodged in there and are next to impossible to wiggle out without damaging expensive lines. This tool made of high tensile strength steel and hooks around the base of the injector; where they are intended to be pulled from.

Crankshaft Pulley Tool 84.50

Crankshaft Tool 2084 Counter Holder Used for R & R of Front Crankshaft PulleyApllicable: VW Audi with 5 Cylinder.80, 90 Quattro, 400, 5000 QuantumUsed in conjunction with tool 2079

Crankshaft Wrench 103.50

Crankshaft Wrench 2079 Extension Wrench used for R & R of Front Crankshaft BoltApllicable: VW Audi with 5 Cylinder.80, 90 Quattro, 400, 5000 Quantum

Cylinder Head Tools 23.50

Cylinder Head Alignment Kit VA6000 Like Volkswagen Tool 3070 Set comes with (2) pairs of guide pins, 11X1.75mm and 12X1.75mm.VW model Scirocco, Rabbit, Dasher, Fox. Audi model 4000, 5000

Dial Gauge Holder 37.50

Dial Gauge Holder VA6015Diesel Tool Used for accurate adjustment of Bosch diesel injection pump. (SAME AS VW TOOL 2066)
This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator (not included).All VW Audi diesel and Volvo D24 6 cylinder 2.4L diesel 1981 86 engines. This holder will only work with a dial guage with a shank size of 8mm or less.
It will NOT work with a larger shank.

Dial Indicator and Holder 98.50

Bosch Diesel Injection Pump
Timing Indicator Tools.
With High Quality Dial Indicator Made in Germany!
You will not find this price anywhere except Zdmak!
Tools are used for the accurate setting of
the Bosch diesel fuel injection pump timing.
The Holder screws into the back of the injection pump,
giving a dial indicator reading necessary for setting
the correct pump timing.
This set comes complete with the correct tools for the job!
Contents: Metric Dial Indicator Made in Germany,
plus holder plus the 10cm dial indicator extension pin,
making the timing easy to set,
as the timing has a range from 0.83mm to 1.15mm.
For use on VW and Audi diesels.
Also works with 1981 1986 Volvo 6 cyl 2.4L diesels,
1989 1994 Dodge 6 cyl 5.9L diesels.

FYI FOR PEOPLE WHO DECIDE "NOT" TO USE THIS SET
Here is some helpful info...Universal conversion factor for milimeters into decimal inches is .03937
EXAMPLE: 13mm X .03937= .5118"

Dipstick Funnel 4.99

Dipstick Funnel Volkswagen Audi used on many enines from 85 thru 99 item number 53103 663

Drive Belt Sprocket 42.50

NUMBER VA6018Drive Belt Sprocket WrenchLocking wrench used for R&R of drive belt sprocket on cam shaftand drive belt sprocket of intermediate shaft.Applicable: All VW Audi water cooled engines 1974 and Newer.

Factory Tool 3417 29.50

Item Number 3417 Original Oil service Wrench 74mm with14 Points (inside flats flutes).
Applications include: Audi, VW Golf, and new body Jetta, TDI (Diesel)
and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0litre,
Rabbit, Dasher, Scirocco, and New Beetle.
Super High Quality Original Factory Tool Made in Germany!
Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed.

FENDER PROTECTOR 0.00

FENDER PROTECTOR FOR AUDI
PREVENTS DAMAGE TO FRONT QUARTER PANELS ON AUDI VEHICLES DURING REPAIR. COVER WILL NOT SCRATCH VEHICLE. SUITABLE FOR ALL AUDI MODELS * EXCEPT AUDI TT

Front Crankshaft Pulley Set 187.50

Crank shaft pulley Set of 2 tools:VW 2084 & 2079Counter Holder 2084needed for R&R of front crank shaft pulley. ApplicaTIONS for 2084: VW/Audi models with 5 cylinder engines 80, 90, Quattro, 4000, 5000, Quantum.Used in conjunction with Extension Wrench 2079 BELOW. PLUS: 2079 Extension Wrench needed for R&R of front crank shaft bolt.ApplicablE: VW/Audi models with 5 cylinder engines80, 90, Quattro, 4000, 5000, Quantum.

Fuel Pump Wrench 79.50

FUEL PUMP WRENCH
WRENCH FOR INSTALLING/REMOVING FUEL PUMP ON AUDI 90 QUATTRO (B4).

Hazet Oil Service Tool 29.50

Oil service Wrench 74mm with 14 Points (inside flats flutes).
Some applications include: Mercedes, Audi, VW Golf,
and new body Jetta, TDI (Diesel) and the following gas vehicles;
Passat, Golf and Jetta with 1.8 turbo and 2.0 litre, Rabbit, Dasher, Scirocco,and New Beetle.
Mercedes M104, M110, M111, M119, M120 C, E
Porsche 944 and 924. 
Some Toyota (Filter 08922 0211 etc...)
Can also be used on BMW Top of housing 1.9L M44
Super High Quality Original Factory Tool Made in Germany!
Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed.

Hazet Tensioning Tool 75.98

Driving Tool for Tensioning Device
special steel, for operating devicewhen changing the V ribbed belt,especially on VW Polo, Golf and Passat, AUDI since 1991.

Headbolt & Drain Plug Socket Set 2 28.00

Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

Headbolt Socket 17.50

This is the tool you are looking for.
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

Headbolt Tool Set 2 29.50

These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

HEATER CLAW 25.50

AUDI TOOL FOR 83 AND OLDER USED TO REMOVE HEATER

Hex Socket 27mm 14.99

Hex Socket 27mm with 3/8" Drive Special Tool 27mm hex Used for R&R of 27mm "female" hex timing plug of engine bell housing and R&R of 27mm female hex transmission access cover. Picture is not to scale. Applicable: All VW/Audi water cooled models '75 and newer.

Locking Pin 9.50

Lock Pin for Diesel 2064 For securing Bosch injection pump sprocket from rotatingduring R&R of cam shaft drive belt. This Pin also assists in locating the general timing position of pump.Applicable: All VW Audi diesel engines. Volvo D24

You Searched for

audi 3391

Trade Links With ZDMAK